2019 MAZDA RX-71.3L Petrol

This Mazda RX-7 passed its most recent MOT test on 2022-03-02 with no defects recorded, placing it in a stable roadworthiness state at the time of testing. The absence of advisories or repeated failures suggests the vehicle cleared all mandatory checks for brakes, suspension, steering, emissions, and structural integrity. However, the test occurred nearly four years ago , meaning critical components like brake discs, suspension bushes, and coil springs—alongside wear items such as tyres and wiper blades—will have accumulated significant mileage since then. Without intervening maintenance or a subsequent MOT, there is no evidence to confirm whether these systems remain within safe operational limits. The recorded mileage of 47,050 miles over approximately seven years equates to an average of 6,721 miles per annum , which is typical for a vehicle of this age. The sparse MOT history—limited to a single test in 2022—precludes any assessment of long-term maintenance trends. While this mileage does not indicate excessive wear, it also means components such as brake pads, tyres, and suspension parts may have reached or exceeded their expected service intervals. The lack of intervening MOTs or service records makes it impossible to determine whether the vehicle has been regularly serviced or if critical checks (e.g., fluid levels, suspension condition) have been neglected. Given the four-year gap since the last MOT , a buyer should prioritise an independent inspection of brake discs and calipers for uneven wear or binding, particularly if the vehicle has been driven aggressively or in wet conditions. Suspension bushes and coil springs should be examined for cracks, excessive play, or corrosion, as these are common failure points in high-performance rear-wheel-drive vehicles. The exhaust system warrants scrutiny for leaks or rust penetration, especially if the car has been exposed to salted roads. Tyre tread depth and lateral wear patterns must also be verified, as failing twice on tread in prior tests (if any) would suggest basic upkeep was overlooked. Finally, the engine bay should be inspected for fluid leaks, belt tension, and general corrosion, as these issues often escalate over prolonged periods without maintenance.