MINI CLUBMAN2016 · 1.5L Petrol

The vehicle’s most recent MOT test on 2026-03-05—just four months ago—confirms it passed without defects, though the preceding day’s failed test at the same mileage (92,296) suggests a technical oversight rather than a persistent mechanical issue. The pattern over the past three years shows no recurring faults, with all tests either passing or failing for procedural reasons, indicating no evidence of worsening structural or safety-critical failures. However, the repeated failures in March 2025 and March 2026 at identical mileages (81,158 and 92,296) warrant scrutiny of whether the tester missed genuine issues or if the vehicle was simply retested due to administrative delays. The recorded mileage of 92,298 miles over ten years aligns with typical usage for this age, averaging around 9,230 miles annually. There are no large gaps in mileage between tests, and the progression from 68,166 miles in February 2024 to 92,298 miles now suggests consistent driving rather than prolonged neglect. The absence of mileage spikes or extended periods of inactivity also reduces the likelihood of severe wear on suspension bushes, coil springs, or drivetrain components that might accompany irregular use. Given the lack of defects in the MOT history, the primary focus for an in-person inspection should centre on high-wear items that aren’t routinely tested. The brakes—particularly the rear calipers—should be checked for binding or excessive wear, as the repeated failures at identical mileages could hint at inconsistent maintenance. Suspension components, including the condition of the rear bushes and coil springs, should be examined for cracking or excessive play, while the brake discs and pads should be measured for remaining thickness beyond the MOT threshold. Corrosion at wheel arches, sills, and the subframe is also critical, given the vehicle’s age, as this often develops gradually and isn’t always caught in a standard MOT. Finally, the exhaust system should be inspected for leaks or excessive rust, especially around joints, as this can compromise emissions and structural integrity over time.