2019 FORD MUSTANG7.0L Petrol

The vehicle’s most recent MOT test on 25 September 2025 confirms it remains roadworthy, with no defects recorded at 28,119 miles. This pattern of clean passes—spanning four consecutive tests from June 2022 to September 2025—indicates no recurring mechanical failures or advisory issues that would suggest worsening conditions. The absence of advisories or defects across these intervals suggests the vehicle has been maintained at a basic level, though the lack of recorded servicing details means wear on non-MOT-checked components (such as transmission fluid, differentials, or suspension bushes) cannot be confirmed. The tester’s failure to note any advisories—even for minor items like worn suspension bushes or binding calipers—implies either diligent upkeep or deferred maintenance that hasn’t yet reached MOT thresholds. The recorded mileage of 28,119 miles over seven years (as of July 2026) averages approximately 4,017 miles annually, which is unusually low for a vehicle of this age and type. This suggests prolonged periods of inactivity or storage, which can accelerate degradation of fluids, tyres, and rubber components. The mileage increments between tests are minimal: just 56 miles between the 2024 and 2025 tests, and 101 miles between the 2023 and 2024 tests, indicating the vehicle was likely stationary for extended periods. Such low mileage could also mean the odometer was not reset, but without additional verification, this remains speculative. The gap between the 2022 and 2023 tests (161 miles) is slightly higher, yet still suggests limited use rather than aggressive driving. Given the clean MOT history, a buyer should prioritise an inspection of components not routinely checked during the test, particularly those susceptible to prolonged inactivity. Focus on the suspension—coil springs, bushes, and dampers—where wear may not yet have manifested as MOT failures but could affect handling. The brakes, while not flagged, should be scrutinised for uneven wear or binding calipers, especially if the vehicle has been stored with the brakes applied. Tyre condition is critical; failing twice on tread depth in prior tests (if any) would have been noted, but visual inspection is essential to confirm no hidden damage or uneven wear from uneven loading. Finally, check for corrosion around wheel arches, sills, and the subframe, as rust can compromise structural integrity without immediate MOT consequences. The absence of advisories does not guarantee these areas are sound, so a thorough visual and functional assessment is advised.