MAZDA MX-52003 · 1.6L Petrol

This Mazda MX-5 passed its most recent MOT test on 2022-07-23 with no defects recorded, marking a clean history over the past four years. The absence of advisories or failings suggests the vehicle has not experienced any recurring mechanical or structural issues during that period. However, the 2022 test date —now over three years ago—means the vehicle has not undergone a formal roadworthiness assessment since then. Given the car’s age and mileage, this gap introduces uncertainty about whether any wear or deterioration has developed in critical areas like suspension, brakes, or corrosion since the last inspection. The recorded mileage of 140,232 miles over approximately 23 years equates to an average of around 6,100 miles per year , which is typical for a vehicle of this age. There are no intermediate MOT records to confirm maintenance intervals, but the steady accumulation suggests consistent use rather than prolonged neglect or storage. Without additional service history, it is impossible to verify whether routine maintenance—such as fluid changes, timing belt inspections, or suspension servicing—has been performed as recommended. The lack of earlier MOT entries means there is no data to assess whether the vehicle has experienced a worsening or improving trend in mechanical condition. Given the sparse MOT record, a buyer should prioritise an independent inspection of suspension components , particularly the bushings and coil springs , which are prone to fatigue at this mileage. The braking system —including discs, pads, and calipers—should be checked for uneven wear or binding, as older vehicles often develop issues in these areas. Corrosion, particularly around the subframe, sills, and wheel arches , is a common concern for this model age and should be thoroughly examined. The exhaust system should also be inspected for leaks or structural weakness, as rust can compromise integrity. While the MOT history shows no recent failures, the absence of advisories does not guarantee current compliance, so a detailed mechanical assessment is essential.