2016 AUDI A4 SPORT ULTRA TDI S-A2.0L Diesel

The vehicle’s most recent MOT, conducted on 30 August 2025 at 178,075 miles, confirms it passed without any defects or advisories, a consistent pattern across all five recorded tests since December 2020. This suggests the car has been maintained at a level sufficient to meet current DVSA roadworthiness standards, though the absence of advisories does not preclude underlying wear or deferred maintenance. The clean history implies no repeated failures in critical systems, but the high mileage demands thorough independent verification of components prone to gradual degradation, particularly those not captured in MOT testing. The recorded mileage progression reveals a steady accumulation of approximately 17,800 miles annually, which is above the average for a vehicle of this age. Notably, there is a gap of nearly two years between the December 2020 and May 2022 tests, during which the mileage increased by 19,652 miles—suggesting either prolonged storage or consistent high usage. The subsequent intervals (around 18,000 miles per year) indicate ongoing operation without extended periods of inactivity, which could accelerate wear on suspension bushes, coil springs, and drivetrain components. The lack of advisories or defects does not negate the need for inspection of high-mileage items like turbocharger condition, differential fluid integrity, and exhaust system corrosion. Given the vehicle’s age and mileage, a buyer should prioritise an inspection of the suspension geometry, particularly the rear multi-link system, for worn or cracked bushes and corroded coil springs. The braking system, while not flagged in MOTs, warrants scrutiny for uneven pad wear, binding calipers, or warped discs—especially if the vehicle exhibits pulling or reduced stopping efficiency. The turbocharger and intercooler should be checked for oil leaks or carbon buildup, as TDI engines at this mileage are susceptible to carbon fouling and turbo wear. Additionally, the underbody should be examined for structural corrosion around wheel arches, sills, and exhaust components, as prolonged exposure to road salt or moisture accelerates deterioration. The absence of advisories in recent tests does not guarantee these areas are intact.