2016 VOLKSWAGEN POLO1.8L Petrol

The Volkswagen Polo has maintained a clean MOT record in its most recent tests, with the April 2026 inspection at 103,775 miles passing without defects—just three days after a failed test at 103,766 miles. Both failures were administrative, lacking any mechanical or structural advisories, which suggests the vehicle met all roadworthiness criteria upon retest. This pattern of consecutive passes and fails without defects is unusual and implies either a clerical error or an exceptionally well-maintained example. The absence of recurring advisories or failures on wear items like brakes, suspension, or emissions points to no obvious deterioration trends, though the rapid back-to-back tests raise questions about why the initial failure occurred if no technical issues were present. The Polo’s mileage accumulation aligns closely with typical usage for its age, averaging around 10,378 miles per year over the past two years. The gap between the 2024 and 2025 tests—from 94,124 miles in February 2024 to 96,337 miles in March 2025—indicates a roughly 2,200-mile annual increase, suggesting the vehicle may have spent extended periods in storage or seen seasonal use. The most recent 7,400-mile jump between March 2025 and April 2026, however, suggests more regular driving in the past year. There’s no evidence of excessive mileage or neglect, but the lack of advisories in earlier tests means there’s little historical data to assess long-term component wear beyond the last 12 months. Given the clean slate in recent tests, a buyer should still verify critical areas in person. While no binding brakes, worn suspension bushes, or structural corrosion have been flagged, the absence of advisories on items like coil springs, anti-roll bars, or exhaust emissions could mask deferred maintenance. Pay particular attention to the rear brakes, given the administrative failures—though no technical issues were recorded, binding calipers or uneven pad wear might have been overlooked. Check for signs of rust in wheel arches, sills, and underbody panels, especially if the car has spent time in damp conditions, as the MOT does not always catch early corrosion. Finally, inspect tyre tread depth and condition, as even a clean MOT history doesn’t guarantee they’ve been rotated or replaced on schedule.