MITSUBISHI I2007 · 0.7L Petrol

The vehicle presents a stable mechanical condition based on its documented history, though the maintenance trend currently rests on a five-year-old snapshot. The most recent test on 23 August 2021 at 59,500 miles passed without any defects, indicating the Mitsubishi met all roadworthiness standards at that time. Prior to this, the record shows a clean bill of health in August 2019 at 57,106 miles. Two failed tests appear in the history—on 6 August 2019 and 17 August 2020—yet neither lists recorded defects, suggesting these were likely administrative or very minor issues rectified immediately, as the subsequent retests passed cleanly the following days. The mileage profile reflects exceptionally low usage for a 2007 vehicle, averaging roughly 3,100 miles annually. Between the August 2019 and August 2020 tests, the odometer advanced by 1,168 miles, followed by a 1,225-mile increase by August 2021. Critically, the recorded mileage has remained static at 59,500 miles since the August 2021 test. Today, 7 July 2026, marks nearly five years without a valid MOT or any recorded mileage increase. This prolonged stationary period raises questions about the vehicle's operational status, as long-term standing can degrade consumables like rubber seals, tyres, and brake components through seizure or perishing rather than wear. A physical inspection must prioritize the effects of this extended dormancy. Tyres will likely exhibit flat-spotting or sidewall cracking from remaining stationary under load, requiring close scrutiny of the manufacture dates. Brake discs and calipers are highly susceptible to surface corrosion and binding after prolonged inactivity; a road test must verify the handbrake releases freely and the footbrake pulls evenly without judder. Suspension bushes and shock absorbers may have deteriorated from lack of movement, so checking for perishing and leaks is essential. The exhaust system and underbody require a thorough examination for corrosion, as standing vehicles often suffer from moisture accumulation in the box sections, compromising structural integrity.