1995 APRILIA PEGASO0.7L Petrol

The Aprilia Pegaso’s most recent MOT history, ending just eight months ago on 30 September 2025, reveals a stable but unusual pattern. The vehicle passed twice on the same day at 35,256 miles—an anomaly in itself—with no defects recorded in either test. This suggests either a flaw in the DVSA’s data logging or, more likely, that the tester did not identify any critical failings during the inspection. The preceding tests in May 2023 and April 2022 also passed without failings, indicating no recurring mechanical issues were detected. However, the lack of any advisories or defects across these tests does not guarantee the absence of hidden wear, particularly in components not routinely checked under MOT—such as chain tension, clutch condition, or throttle response. The recorded mileage of 35,256 miles over nearly three decades—roughly 1,137 miles per year—is unusually low for a vehicle of this age and type. The gap between the 2022 and 2023 tests shows just 300 miles accumulated in over a year, while the 2023 to 2025 period saw a slight increase to 786 miles. Such minimal usage raises questions about storage conditions, as prolonged inactivity can accelerate corrosion in suspension bushes, coil springs, and brake calipers, even if the vehicle remains roadworthy. The absence of mileage spikes also means consumables like tyres, brake pads, and chain links may have been underutilised, potentially masking wear that would otherwise be more evident. Given the sparse MOT record, a buyer should prioritise an independent inspection of high-wear components not routinely tested. Focus on the suspension—particularly the rear swingarm bushes and front fork seals—for signs of drying or cracking, which can occur even with low mileage if the bike was stored unsafely. The brakes, though not failed in MOTs, should be checked for uneven wear or binding calipers, as older systems can develop sticking pistons or corroded guide pins. The chain and sprocket require inspection for elongation or excessive slack, while the exhaust system should be examined for rust penetration, especially at joints and undercarriage points. The electrical system, including lights and switches, should also be tested, as prolonged disuse can degrade wiring and connectors. Finally, a thorough check of the fuel system—including hoses, filters, and carburettor (if applicable)—is warranted, as stagnant fuel can cause gumming or corrosion over time.