2012 AUDI A31.6L DIESEL

The 2012 Audi A3 holds a valid MOT pass dated 20 January 2026 at 113,390 miles, yet the record reveals a worsening suspension and corrosion trend that demands caution. In the January 2026 test, both front and rear coil springs were flagged for corrosion, and both front shock absorbers were noted as having a light misting of oil. These same corrosion and misting defects appeared in the immediate preceding failure at 111,390 miles on the same date, indicating the car failed, was retested, and the tester still recorded the same underlying faults as advisories rather than fixes. The pattern is not resolving. Mileage accumulation sits at roughly 8,099 miles per year, which is typical for a 14-year-old vehicle, but the jump from 102,708 miles in February 2025 to 113,390 miles by January 2026 represents approximately 10,682 miles in under twelve months, a noticeable acceleration. The earlier years show steadier use, rising from 85,537 miles in February 2023 to 94,039 miles in February 2024, then to 102,708 miles in February 2025. The recent spike places additional stress on already flagged suspension components and consumables. Buyers should inspect the coil springs closely for section loss and cracking beyond surface corrosion, particularly where the under tray may trap moisture against the metal. Front shock absorber misting suggests early seal degradation, and if the misting has progressed to visible weeping or damping loss, replacement will be necessary. The anti-roll bar ball joint dust joint cover defect noted in the January 2026 failure may have been addressed, but the joint itself should be checked for play and ingress of road debris. Tyre condition has been a recurring consumable issue, with tread depth below 1.6mm flagged on three separate occasions across the 2025 and 2026 tests. Combined with the advisory for cracking and perishing on the offside rear tyre in February 2025, this suggests the car may have stood for extended periods between use, accelerating sidewall deterioration. A thorough inspection of tyre date codes, sidewall integrity, and suspension bush wear is essential before purchase.