HONDA CBF 1000 AT-92009 · 1.0L Petrol

The vehicle’s most recent MOT test on 2024-09-13 confirms it remains roadworthy with no defects recorded at 21,929 miles. This represents a stable maintenance trend over the past five annual tests, with consistent pass results and no advisories or failures. The last inspection occurred just under three years ago, which, while technically within the MOT’s three-year validity period, means the vehicle has not undergone a formal roadworthiness check since September 2024. Given the age of the motorcycle—now 17 years old—this gap introduces uncertainty over whether deferred maintenance or gradual wear has accumulated in components like the suspension, drivetrain, or electrical systems. The recorded mileage of 21,929 miles over 17 years equates to approximately 1,290 miles annually, a figure significantly lower than average for its class. This suggests either minimal use or prolonged periods of storage, which could mitigate some wear but also risks stagnant fluids, degraded seals, or corrosion in exposed metalwork. Notably, the mileage increments between tests remain consistent—around 344 miles per year—with no abrupt jumps or prolonged inactivity between inspections. While the low mileage may reduce concerns over high-wear items like tyres or brakes, it does not exempt the motorcycle from age-related degradation in structural integrity or electrical reliability. Given the absence of recorded defects in the MOT history, the primary focus for an in-person inspection should centre on components prone to silent failure in low-mileage, aged motorcycles. The suspension—particularly the coil springs, dampers, and rubber bushes—should be examined for stiffness, leaks, or excessive play, as these degrade gradually even with minimal use. The braking system warrants thorough scrutiny, including rear and front calipers for binding or uneven wear, as well as brake discs for corrosion or warping; failing twice on tyre tread suggests basic upkeep was skipped, so tread depth and lateral wear should be measured. Corrosion checks are critical, especially around the frame, exhaust headers, and swingarm pivots, where standing water or road salt could have caused hidden structural weakening over time. Finally, the electrical system—battery condition, wiring harness integrity, and switch functionality—should be tested, as age-related failures in wiring or connectors are common in motorcycles left unused for extended periods.