2017 MERCEDES-BENZ GLE3.0L Diesel

The vehicle’s most recent MOT test on 2026-01-15—just seven months ago—confirms it passed without defects, though it was retested immediately after a failure on 2026-01-09. This suggests a minor administrative oversight rather than a recurring mechanical issue, as no faults were recorded in either test. The preceding MOT history, spanning from 2022 to 2025, shows consistent passes with no advisories or defects, indicating a stable maintenance pattern. The absence of repeated failures on critical components like suspension, brakes, or emissions implies the vehicle has been reliably serviced within legal thresholds, though the lack of advisories also means no proactive warnings were issued for wear items such as suspension bushes or brake pads. The mileage progression reveals a steady accumulation of approximately 6,653 miles annually, which aligns with typical usage for a vehicle of this age. The largest gap between tests occurs between 2023 (35,109 miles) and 2025 (49,590 miles), covering 14,481 miles in 22 months—an average of 663 miles per month. While this is not unusually high, it suggests the vehicle was in regular use rather than stored. The most recent 10,291 miles (from 49,590 to 59,881) were covered in just over a year, which is consistent with normal depreciation patterns for a luxury SUV of this class. Given the clean MOT record, a buyer should prioritise a thorough inspection of high-wear components that are not routinely tested under MOT standards. The suspension—particularly coil springs, bushes, and dampers—should be examined for uneven wear or corrosion, as these are critical for ride quality and handling. Brake discs and calipers warrant close scrutiny, especially if the vehicle exhibits any pulling or binding, as the MOT does not always catch early signs of uneven wear. Additionally, the underbody should be inspected for corrosion, particularly around the sills, wheel arches, and exhaust system, as Mercedes-Benz GLE models are prone to rust progression in these areas over time. Finally, the tyre tread depth and condition should be verified, as the absence of MOT failures does not guarantee they have been consistently maintained.