2021 AUDI A3 S LINE 40 TFSI E S-A1.4L Hybrid Electric (Clean)

The vehicle’s most recent MOT test on 10 June 2022 confirmed full roadworthiness with no defects recorded at 38,364 miles. Given the absence of any subsequent tests, the record provides no evidence of ongoing mechanical issues or recurring advisories. However, the lack of further MOTs—particularly none since June 2022—means critical components such as brakes, suspension, and emissions systems have not been re-evaluated under current regulations. The last test’s clean pass suggests no major failures at the time, but the vehicle’s age (five years as of July 2026) and mileage (38,364) now necessitate a thorough inspection of high-wear areas that may have developed issues since the last check. The recorded mileage of 38,364 miles over five years equates to approximately 7,673 miles annually, which aligns with typical usage patterns for this model. There are no gaps or spikes in the record to suggest periods of neglect or excessive wear, though the single MOT entry limits broader trend analysis. Without additional data, it is impossible to confirm whether maintenance was consistent or if minor issues were addressed privately. The lack of a second MOT within the standard five-year cycle also raises questions about whether the vehicle was kept on the road without further scrutiny. Given the sparse MOT history, a buyer should prioritise an immediate inspection of the brake system, including caliper binding, disc thickness, and pad wear, as these are common failure points in this age range. The suspension—particularly coil springs, bushes, and dampers—should be checked for uneven wear or corrosion, especially if the vehicle has experienced uneven loading or off-road use. Exhaust emissions and catalytic converter efficiency, while not flagged in the last test, may have degraded over time, warranting a diagnostic scan. Structural integrity, including underbody corrosion and frame condition, must also be assessed, as these issues often develop gradually and are not always captured in a single MOT. Given the absence of recent testing, no component can be assumed to remain in optimal condition.