2006 BENTLEY CONTINENTAL6.0L Petrol

The vehicle remains roadworthy as of its most recent MOT on 2025-07-01, with no defects recorded at 48,308 miles. The maintenance trend is stable, with consecutive passes over the past four years and no emerging mechanical or structural issues flagged in the last three tests. The only prior concern, noted in 2021, involved minor suspension bush wear that did not meet the threshold for failure, and since then, no further suspension-related advisories have appeared. This suggests consistent upkeep and no escalating wear on critical components. The mileage history reveals a remarkably low annual average of approximately 2,415 miles over the vehicle’s 20-year life, which aligns with the low total of 48,308 miles. The record shows steady, gradual increases between tests — from 39,189 miles in 2021 to 48,308 miles in 2025 — with no sudden jumps or long gaps in testing. This pattern implies the car has been driven sparingly, likely stored or used infrequently, which may preserve mechanical integrity but also raises questions about long-term component integrity due to inactivity, particularly in brake systems, suspension joints, and exhaust components. Despite the clean MOT history, a buyer should inspect the front suspension bushes and control arms closely, as the 2021 report noted wear that, while not critical, indicates these parts are susceptible to degradation over time. The absence of subsequent suspension issues is reassuring, but given the age, a full suspension inspection — including ball joints, coil springs, and anti-roll bar mounts — is prudent. Brake systems should also be scrutinized, especially the rear calipers and discs, as binding or uneven wear can develop quietly in low-mileage vehicles. Exhaust corrosion and structural rust, particularly around wheel arches and sills, should be checked, as these are common age-related failures even with low mileage. The vehicle’s MOT record shows no major or dangerous defects, and the consistent passing history suggests the owner has maintained it to a reasonable standard. However, the low mileage does not equate to mechanical freshness — components like brake fluid, suspension seals, and rubber bushings may have aged or dried out despite minimal use. A pre-purchase inspection should focus on these areas, particularly the front suspension, brake assemblies, and underbody corrosion, to confirm no hidden deterioration has occurred since the last test.