NISSAN CUBE KAIZEN1.6L Petrol

The Nissan Cube Kaizen presents a clean MOT history with no recorded defects across its last four tests, culminating in a recent pass on 27 May 2025 at 62,787 miles. This indicates a stable maintenance trend, with no signs of recurring issues or worsening mechanical concerns. The absence of advisories or failures—even on the sole failed test in March 2022 (47,771 miles), which lacked defect details—suggests the vehicle has been well maintained or that any minor issues were addressed promptly. The most recent test, just over a year ago, confirms compliance with current emissions and safety standards, though buyers should verify no deferred repairs were carried out privately. Mileage accumulation appears steady, with roughly 7,200 miles covered annually between tests, aligning with typical urban/suburban usage. The gap between the March 2022 failure and the April 2022 retest (a mere 94-mile difference) is unusual and may imply a rapid resolution of an unspecified issue, though the lack of recorded defects makes further speculation difficult. Without a full service history, it’s impossible to confirm if the vehicle has been consistently serviced, but the absence of defects in four consecutive passes—including two within the same year—points to reliable upkeep. Given the MOT record’s lack of defects, no specific components stand out for immediate concern. However, a buyer should inspect the suspension for worn bushes or coil springs, as these are common wear points not always caught in basic MOT checks. The brakes should be tested for binding or uneven wear, particularly if the 2022 failure involved an unrecorded issue. Structural integrity, including sills and wheel arches, should be examined for corrosion, especially in older models prone to rust. Exhaust emissions and fuel system efficiency may also warrant a closer look, given the vehicle’s age and the absence of recorded advisories on these systems. While the MOT history is reassuring, the lack of detailed failure notes in 2022 leaves a minor uncertainty. A pre-purchase inspection focusing on suspension, brakes, and structural condition would provide full clarity on the Cube’s true condition.