IsItAGoodCar
Reliability Guide

Common Problems with the
1972 Datsun 240Z / 260Z

The 1972 model year brought significant design changes including redesigned centre console, new teardrop-style wheel covers, flip-forward seats, and auto seat belt retractors. The rear end was moved rearward by 35mm for improved weight distribution. These "Series III" cars are the most refined of the 240Z generation and are increasingly sought after by collectors.

What changed for 1972

  • •Redesigned centre console with ash tray behind gear lever
  • •New teardrop-style wheel covers
  • •Flip-forward seats and auto seat belt retractors
  • •Rear end moved rearward 35mm

Common MOT watch-outs

  • !Rust remains the primary concern regardless of model year
  • !Check for correct Series III identification features
4
Known Issues
2
Serious
2
Moderate
0
Minor

All Known Issues

Structural Corrosion (Rust)

SeriousBodywork & Rust

The S30 chassis has many hidden box sections where moisture traps and eats the metal from the inside out. Frame rails, battery trays, and floor pans are the most common failure points.

Est. Repair Cost: £5,000–£20,000+
Warning Signs:

Bubbling paint, Soft spots in floor/sills, Doors not aligning (suggesting chassis flex), MOT failure for structural rot

What to Inspect:
  • Magnet test on sills and arches
  • Hammer tap on frame rails
  • Check under the battery tray for acid/water damage
Verified by IsItAGoodCar Research Team

Overheating & Head Gasket Failure

SeriousCooling System

Older L24/L26 engines can suffer from silt buildup in the radiator or blocked coolant passages in the block, leading to localized overheating and warped heads.

Est. Repair Cost: £1,000–£3,000
Warning Signs:

Temp gauge climbing in traffic, White smoke from exhaust, Mayo-like sludge under oil cap

What to Inspect:
  • Condition of coolant (should be clean)
  • Ask when the water pump/radiator was last replaced
  • Test for exhaust gases in coolant
Verified by IsItAGoodCar Research Team

Carburetor & Fuel System Issues

ModerateFuel System

The Hitachi-SU carburettors require regular maintenance and adjustment. Worn needles, vacuum leaks and gummed-up passages cause flat spots, poor idle and hesitation. Parts are hard to source, with many owners converting to Webers.

Est. Repair Cost: £200–£600
Warning Signs:

Hesitation on acceleration, Stalling at idle, Rich or lean running, Strong fuel smell

What to Inspect:
  • Check for smooth throttle response through the range.
  • Look for fuel leaks around carburettors.
  • Inspect fuel lines for perishing.
  • Ask if Weber conversion has been done.
Verified by IsItAGoodCar Research Team

Wiring Loom Degradation

ModerateElectrics & Electronics

After 45+ years, the original wiring loom becomes brittle. Corroded fuse connections, cracked insulation and perished earth straps cause intermittent electrical faults throughout the car.

Est. Repair Cost: £100–£500
Warning Signs:

Intermittent lighting failures, Gauge erratic behaviour, Flickering dashboard lights, Blown fuses

What to Inspect:
  • Inspect fuse box for corrosion.
  • Check all earth points for clean metal contact.
  • Test all electrical systems including lights and gauges.
  • Consider a relay upgrade for headlights.
Verified by IsItAGoodCar Research Team

Buying Tips for 1972 Datsun 240Z / 260Z

  • ✓Series III cars are identified by the redesigned console and teardrop wheel covers
  • ✓The 1972 is often considered the best-balanced 240Z for UK driving
19711973–1978
Check a 1972 Datsun 240Z / 260Z by Registration