Common Problems with the
2008 Peugeot 407

PSA's FAP diesel particulate filter system relies on a cerium-based additive fluid (Eolys) stored in a reservoir near the fuel tank, injected automatically during refueling to lower DPF regeneration temperature. In cars used predominantly for short urban trips, DPF regeneration fails to complete, causing soot blockage. Furthermore, once the Eolys fluid depletes (typically around 70,000–80,000 miles), the ECU triggers a persistent 'Depollution System Fault' and limp-home mode.

The 407 employs a decoupled pivot double-wishbone front suspension system that relies on upper and lower swivel pivot pins fitted into spherical ball joints on each hub. Due to the vehicle's heavy front kerb weight and harsh UK road surfaces, the lower hub swivel ball joints experience severe wear and play, often by 50,000 miles. Symptoms include heavy clunking or knocking noises over speed cushions, steering wander on motorways, rapid inner front tyre wear, and frequent MOT test rejections.

Dual-zone climate control models suffer from a notorious flaw where the internal plastic drive shaft connecting the temperature blend door to the electric stepper motor snaps inside the heater casing. When the shaft shears, the blend door drops and jams into position, usually resulting in freezing cold air blowing continuously onto the driver while hot air blows on the passenger, or vice versa. Proper repair traditionally required complete dashboard removal and an expensive heater casing replacement.