2002 BMW Z3 2.2L Petrol · A17 NAG

The vehicle presents a generally stable maintenance profile, though recent records indicate intermittent mechanical attention is required. The most recent test on 20 April 2026 at 81,672 miles passed with a minor advisory regarding a broken rear silencer vibration damper. This follows a period of fluctuation, including a failure in May 2025 at 80,021 miles due to a leaking offside rear brake hose. While the vehicle has maintained a consistent pass rate, the presence of hydraulic and exhaust components requiring attention suggests a pattern of addressing faults as they arise rather than proactive preventative maintenance. The mileage accumulation is notably low for a 2002 model, averaging approximately 3,400 miles per year. The data shows steady, incremental usage, such as the 1,450-mile increase between the April 2024 and April 2025 tests. This low-mileage usage pattern often correlates with reduced mechanical wear on the drivetrain, but it can also lead to the degradation of rubber components and seals due to inactivity. The record shows no significant gaps in testing, indicating the vehicle has remained in regular, albeit light, circulation. A prospective buyer should prioritise a thorough inspection of the front suspension geometry and tyre wear. Between 2022 and 2024, the MOT records repeatedly flagged inner edge tyre wear, suggesting potential issues with wheel alignment or worn suspension bushes. The 2015 test specifically noted a deteriorated offside front lower suspension arm rubber bush, so checking the current condition of all control arm bushings and ball joints is essential. The braking system also warrants close scrutiny. Following the 2020 failure for a binding offside front brake and the 2025 failure for a leaking rear brake hose, a physical check of the calipers, hoses, and master cylinder is necessary to ensure no further hydraulic degradation exists. Finally, the recent exhaust vibration damper issue suggests the buyer should inspect the entire exhaust system for mounting integrity and signs of corrosion to avoid future failures.