2014 MERCEDES-BENZ SPRINTER2.1L Diesel

The vehicle’s most recent MOT on 2025-05-30 at 190,450 miles showed a pass with no defects recorded, but this followed a fail on the same date at the same mileage. The prior test on 2023-12-29 at 180,026 miles also included a pass and fail with no defects. This pattern of repeated passes and fails without recorded issues suggests either procedural inconsistencies or minor, non-critical faults that were resolved. The absence of structural, braking, or suspension defects in the records indicates the vehicle has maintained basic roadworthiness, though the frequency of fails raises questions about the reliability of the testing process or the presence of unresolved minor issues. The mileage of 190,450 miles at 12 years old equates to an average of 15,871 miles annually, which is high for this age. The records show a 9,471-mile increase between the 2023-12-29 test (180,026 miles) and the 2025-05-30 test (190,450 miles), suggesting accelerated usage in the past 18 months. Earlier, the 2022-12-29 test recorded 171,455 miles, implying a slower accumulation of 8,571 miles over 12 months. This fluctuation may reflect varying usage patterns, but the overall high mileage increases the likelihood of wear on components such as brake discs, suspension bushes, and exhaust systems. The sparse data between 2022 and 2023 also limits insight into potential maintenance gaps. A buyer should prioritize an in-person inspection of the suspension system for worn bushes or coil springs, given the high mileage, and check for brake disc warping or caliper binding, which can occur with frequent use. The exhaust system and underbody should be examined for corrosion, as high-mileage vehicles are prone to rust in critical areas. While the MOT records show no structural defects, the repeated fails without detailed notes warrant scrutiny of the vehicle’s service history to confirm whether underlying issues were addressed. The lack of tyre tread or wiper blade failures in the records suggests basic upkeep, but other mechanical components may require closer evaluation.