2021 Hyundai Tucson SE Connect T-GDI 1.6L Petrol · BR11 AAR

The latest MOT test conducted on 8 April 2026 resulted in a pass with no defects recorded. Looking back through the history to October 2024, the vehicle has maintained a consistently clean record with no advisories or failures across three consecutive tests. This indicates a very stable maintenance trend and suggests that the vehicle has been kept in a roadworthy condition without the emergence of typical wear and tear issues that often surface as a vehicle enters its fifth year of service. The recorded mileage of 38,902 miles is well aligned with the age of the vehicle, averaging approximately 7,780 miles per year. This usage rate is considered typical for a modern family SUV and implies a balanced duty cycle. Mechanically, this means the engine, transmission, and chassis have not been subjected to the excessive stress of high mileage commuting, nor have they suffered from the degradation often associated with long periods of inactivity, such as seized calipers or perished seals. Given the absence of MOT advisories, the physical inspection should focus on time based degradation and preventative maintenance. A prospective buyer should closely examine the tyre sidewalls for signs of perishing or fine cracking, as tyres can age out even if the tread depth remains legally sufficient. It is also advisable to check the brake discs for any uneven surface corrosion and ensure there is no evidence of binding calipers, which can occur if the vehicle has spent extended periods stationary between journeys. Finally, verify the service history to ensure that oil changes and filter replacements have been carried out according to the manufacturer calendar intervals rather than relying solely on mileage. At five years old, the 12V battery should be tested for health and cranking capacity to avoid unexpected failure. A thorough check of the suspension bushes and dampers for any weeping or leakage is recommended to confirm that the vehicle continues to handle as intended, ensuring the overall structural and mechanical integrity remains intact.