2007 Audi A4 2.0L Diesel · BX07 AXN

The 2007 Audi A4 with 161,687 miles shows a stable roadworthiness trend based on its most recent MOT, conducted on 2024-01-09 at 161,687 miles, which resulted in a pass with no defects. The prior tests from 2023-01-10 and 2022-01-06 also passed without issues, suggesting consistent maintenance. However, the vehicle has not undergone an MOT since January 2024, leaving a 28-month gap as of 2026-07-22. This absence of recent inspection data raises concerns about potential unrecorded faults, particularly in high-mileage components like suspension bushes, brake discs, or exhaust emissions. The 2023-01-10 test recorded a failure, though no defects were listed, which may indicate a procedural error or a minor issue resolved before retesting. The vehicle’s mileage of 161,687 miles over 19 years equates to an average of 8,510 miles annually, aligning with typical usage for its age. The MOT records show steady progression, with no abrupt spikes in mileage between tests. The 2020-09-17 test at 150,881 miles and subsequent 2022-01-06 test at 152,409 miles suggest gradual wear, but no significant deviations in service intervals. The lack of recurring defects in the last three tests implies the car has been maintained to acceptable standards, though the absence of a 2026 MOT means critical components like coil springs, binding calipers, or corrosion in body panels remain unverified. A buyer should prioritize a hands-on inspection of the suspension system, particularly for worn bushes or coil springs, and check brake discs for uneven wear or corrosion. The exhaust system and structural integrity, including door sills and underbody panels, warrant scrutiny due to the vehicle’s age. While the MOT history lacks major failures, the extended gap since the last test necessitates a thorough pre-purchase assessment to confirm that no latent issues have emerged. The absence of recorded advisories in recent years suggests the car has been well-maintained, but its high mileage and age demand cautious evaluation of mechanical and structural components.