2008 CITROEN C41.7L Petrol

The most recent MOT test on this 2008 Citroën C4 occurred over four years ago, on 28 October 2021, with no defects recorded. While the vehicle passed without fail in that cycle, the absence of any advisories or defects does not guarantee current roadworthiness—especially given the age and mileage. The testers did not flag binding brakes, excessive corrosion, or suspension failures in 2021, but the lack of recent inspection means critical components like coil springs, brake calipers, and subframe integrity could now be compromised. The final advisory in 2019 was a failed test on 15 April, yet the vehicle passed the retest the following day, suggesting a quick resolution of a minor issue—likely a straightforward brake or emission-related fault. Without post-2021 data, the trend appears stable in the record, but the extended gap since the last pass raises concerns about deferred maintenance. The recorded mileage of 98,464 miles over nearly 18 years equates to an average of approximately 5,470 miles annually, which is unusually low for a vehicle of this age. The gap between the 2019 and 2020 MOTs—just over six months—suggests the car was either stored or used minimally during that period, as the mileage only increased by 6,516 miles. The 2020 to 2021 interval saw a more typical accumulation of 4,827 miles, yet the vehicle remained stationary for over four years before the 2021 test. Such prolonged inactivity can accelerate wear on tyres, suspension bushes, and fluid-based systems, particularly if the vehicle was left without protection against corrosion or moisture ingress. The lack of advisories in the MOT history does not preclude hidden deterioration, especially in areas prone to rust, such as wheel arches, sills, and underbody components. Given the extended period since the last MOT, a thorough inspection should prioritise suspension integrity, focusing on worn coil springs, deteriorated bushes, and binding calipers—common issues in vehicles of this age. The brakes, though not flagged in the record, warrant close examination for uneven wear, glazed discs, or seized calipers, particularly if the vehicle has been stationary for prolonged periods. Underbody corrosion should be assessed at wheel arches, sills, and the subframe, as rust can compromise structural integrity and lead to handling issues. Additionally, check for fluid leaks around the engine bay, transmission, and differential, as these can indicate deteriorating seals or worn components. The absence of recent MOT failures does not eliminate the risk of latent faults, so a pre-purchase inspection by a qualified technician is essential to verify the vehicle’s current condition.