2012 Hyundai I30 1.6L Diesel · EJ62 AEL

The vehicle demonstrates a highly stable roadworthiness profile, evidenced by a clean pass on 21 August 2025 at 139,576 miles. The absence of any recorded defects or advisories during the last three annual inspections indicates a disciplined approach to preventative maintenance. While the 2023 test cycle included a failed attempt followed by a successful retest two days later, the lack of specific failure items suggests this was likely an administrative or minor oversight rather than a mechanical failure. The current status reflects a vehicle that has been consistently presented for testing in good order. The recorded mileage of 139,576 over a fourteen-year lifespan averages approximately 9,970 miles per annum, which aligns with typical usage patterns for a vehicle of this class. The accumulation remains steady, with the car covering roughly 11,682 miles between the August 2024 and August 2025 tests. This consistent usage profile is generally preferable to low-mileage examples that may suffer from seized components or perished rubber seals due to prolonged periods of inactivity. The data shows no irregular spikes in mileage, suggesting the vehicle has been used regularly for standard commuting or private transport. Prospective buyers should focus their physical inspection on the common wear items that remain hidden from the MOT test, specifically the condition of the clutch and dual-mass flywheel, which are reaching their expected service life at this mileage. Although the MOT history is clean, verify the status of the timing chain or belt, as a failure here would be catastrophic regardless of the vehicle's clean inspection record. Inspect the suspension bushes and ball joints for any play that may have developed since the last test, and check the brake discs for any signs of scoring or uneven wear that might not have triggered a formal defect notice. Given the age of the chassis, a thorough check for surface corrosion on the subframes and sills is recommended to ensure long-term structural integrity.