MINI MINI2010 · 1.6L Petrol

The most recent MOT test on 26 January 2026 at 130,658 miles passed without any defects, marking the first clean result since at least 2023. The vehicle’s maintenance trend appears stable, with no recurring advisories or failures in the last two tests—both the November 2024 and November 2023 checks passed after initial failures on the same dates, suggesting any prior issues were addressed promptly. The absence of defects in the latest test indicates the car has met all current roadworthiness standards, though the earlier failures in November 2023 and 2024 (both at around 120,000 and 125,000 miles) imply some intermittent issues were resolved before the next test. No major structural or safety-critical components were flagged in the provided records, but the brief failures suggest minor but persistent concerns—likely related to consumables or straightforward mechanical checks—were corrected within months. The mileage accumulation of roughly 8,166 miles per year aligns with typical usage for a 16-year-old vehicle, neither excessively high nor abnormally low. The gaps between tests are consistent, with the most recent MOT just six months prior to today’s date, which is well within the annual requirement. There’s no evidence of rapid mileage spikes or prolonged inactivity, though the absence of advisories in earlier tests makes it difficult to assess long-term wear on components like suspension bushes or coil springs. The fact that the car passed without defects in January 2026 suggests it has been maintained to a standard that meets current DVSA thresholds, but the earlier failures hint at occasional neglect or deferred attention to minor items. For a buyer, the primary focus should be on verifying whether the November 2024 and 2023 failures were due to recurring issues—such as binding brakes, worn suspension components, or minor corrosion—that might resurface. Given the clean January 2026 result, a thorough inspection of the braking system (calipers, discs, and pads) is advisable, as binding brakes were a plausible cause for the earlier failures. The suspension should also be checked for worn bushes, damaged coil springs, or uneven tyre wear, which could indicate alignment or wear issues not captured in the MOT. Structural integrity, particularly around wheel arches and sills, should be scrutinised for corrosion, as the MOT records provide no indication of rust-related advisories. Finally, while the emissions system passed without comment, a pre-purchase inspection of the exhaust and catalytic converter is prudent to rule out leaks or efficiency losses.