JEEP GRAND CHEROKEE LIMITED CRD A2013 · 3.0L Diesel

The most recent MOT test on 2024-10-14 confirms the vehicle passed with no recorded defects, though it follows an unusual pattern of back-to-back failures in September 2024 and April 2023—both with no faults logged. This inconsistency suggests either a test centre error or a vehicle that narrowly avoided minor but unresolved issues during those periods. The latest pass, just nine months ago, means the vehicle remains technically roadworthy under current MOT standards, but the lack of defects in failures raises suspicion over whether critical components were overlooked or if the tester missed subtle faults. Buyers should treat this as a red flag and prioritise an independent inspection, particularly for components that commonly fail without obvious warning signs. The recorded mileage of 86,721 miles over 13 years equates to an average of approximately 6,671 miles annually, which aligns with typical usage for this vehicle’s age. However, the gap between the 2023 and 2024 tests—just 10,858 miles in 17 months—followed by another 1,812 miles in under two months before the 2024 failure, suggests either erratic driving patterns or a vehicle that was driven heavily in short bursts. The absence of any advisory notes in the MOT history means there’s no official record of pre-existing concerns, but this mileage pattern could indicate deferred maintenance. The longest gap, from January 2022 to April 2023 (7,015 miles), might imply the vehicle was either stored or driven infrequently during that period, potentially allowing minor issues to develop unnoticed. Given the lack of specific fault codes in the failures, the most critical areas for an in-person inspection would be the suspension—particularly rear suspension bushes and coil springs, which often degrade without immediate MOT failure—and the braking system. The repeated failures without defects imply the tester may not have detected binding rear calipers or unevenly worn brake discs, which are common in this model. Structural corrosion, especially around the wheel arches, subframe, and sills, should also be thoroughly checked, as this Jeep model is prone to rust in high-exposure areas. Finally, the exhaust system warrants scrutiny; catalytic converter efficiency failures are not uncommon and could explain the sudden pass/fail fluctuations. A pre-purchase inspection should focus on these areas to confirm the vehicle’s true condition beyond the MOT’s limited scope.