2012 TOYOTA YARIS1.3L Petrol

The 2012 Toyota Yaris shows a stable roadworthiness trend over the past three MOT cycles, with the most recent test on 2026-01-10 at 108,988 miles passing without any recorded defects. This consistency suggests the vehicle has been maintained at a basic level, though the single failure in January 2025—despite no defects being logged—indicates a possible administrative oversight rather than a mechanical issue. The absence of advisories or recurring faults implies no obvious pattern of neglect, but the lack of pre-MOT servicing records means critical components like suspension bushes, coil springs, and brake calipers have not been professionally inspected outside the MOT process. Mileage progression reveals a steady accumulation of approximately 7,785 miles annually, which aligns with typical usage for a vehicle of this age. The gap between the 2023 and 2024 tests—covering 1,367 miles in 11 months—suggests minimal standing time, though the rapid jump from 105,548 to 108,988 miles between January 2025 and January 2026 (3,440 miles in a year) could indicate either increased usage or a period of underreporting. Without service intervals or private logbook records, it’s impossible to confirm whether major components like timing belts, differential fluid, or suspension mounts have been renewed as per Toyota’s recommended schedule. A buyer should prioritise an independent inspection of the suspension system, particularly the rear bushes and coil springs, given the vehicle’s age and mileage. The brakes—while not explicitly failed—should be checked for uneven wear, binding calipers, or corrosion on the rear discs, as the MOT tester did not comment on these areas despite the failure in January 2025. Structural integrity is another concern; the chassis rails, sills, and wheel arches should be examined for rust penetration, especially around the rear wheel arches where salt damage is common. Finally, the exhaust system warrants scrutiny for leaks or excessive corrosion, as the MOT history does not provide assurance that minor cracks or pinholes have been addressed.