2021 Audi Q3 S Line 35 Tfsi 1.5L Petrol · HL21 ABN

The most recent MOT test conducted on 26 March 2025 resulted in a pass with no defects or advisories recorded. Reviewing the vehicle history, the maintenance trend appears stable and positive. Although a failure was recorded on 20 August 2024, the issue was rectified within a week to achieve a pass, and the subsequent test remained entirely clear. The absence of recurring advisories suggests that the vehicle has been well maintained and is not suffering from systemic mechanical deterioration. The recorded mileage of 44,052 miles over approximately five years indicates an average annual usage of roughly 8,810 miles. This is considered typical for a vehicle of this age and class. This balanced usage profile is generally ideal, as it avoids the accelerated wear and tear associated with high-mileage commuting while mitigating the risks of long-term standing, such as seized brake calipers, perished rubber seals, or battery degradation. As the MOT history is notably clean, a prospective buyer should focus on physical inspections related to the vehicle's age and usage. It is important to examine the tyre sidewalls for any signs of perishing or hairline cracking, as rubber degrades over time even if the tread depth remains legal. Check the brake discs for surface corrosion or pitting and ensure there is no shuddering under braking, which would indicate disc warping. Given the five-year age of the vehicle, the health of the 12V battery should be verified, as these components often reach the end of their reliable service life around this interval. Furthermore, you must verify the service history to ensure that oil and filter changes have been performed according to the manufacturer's calendar-based intervals rather than solely by mileage. During a test drive, listen for any knocks or clunks from the suspension over uneven road surfaces, which could indicate early wear in the suspension bushes or coil springs that may not yet be severe enough to trigger an MOT failure. Finally, inspect the engine bay for any signs of fluid leaks, specifically around the coolant system and oil housing, to ensure the structural and mechanical integrity of the powertrain.