PEUGEOT 308 ALLURE PREM SW S/S PHEV A2022 · 1.6L Hybrid Electric (Clean)

The most recent MOT test on 2025-07-15 at 15,284 miles confirms the vehicle passed without any defects, indicating a stable roadworthiness trend for this PHEV model. There is no evidence of recurring or unresolved issues in the limited history, though the single test date precludes long-term pattern assessment. The absence of advisories or failings suggests the vehicle has not encountered significant mechanical or structural concerns within the past year. However, the lack of prior MOTs means there is no historical context for wear trends, suspension integrity, or brake system consistency. The recorded mileage of 15,284 miles over approximately four years—roughly 3,800 miles annually—is unusually low for a vehicle of this age, particularly given the PHEV’s hybrid drivetrain, which typically sees higher usage. Such low mileage could imply prolonged periods of inactivity, which may accelerate degradation of fluids, battery health, or suspension components due to static loading. Without intermediate MOTs or service records, it is impossible to determine whether the vehicle was stored correctly or driven under optimal conditions. The current mileage does not rule out deferred maintenance, as low usage might mask underlying issues such as seized suspension bushes or degraded brake calipers. Given the sparse MOT history, a buyer should prioritise an independent inspection of the hybrid battery system, particularly the high-voltage components, as prolonged inactivity can compromise cell integrity. The suspension should be thoroughly checked for worn or dried-out bushes, as static loading may have accelerated elastomer degradation. Binding or uneven brake calipers, particularly on the rear, warrant immediate attention, as hybrid vehicles often experience brake wear disparities due to regenerative braking dominance. Corrosion at wheel arches, subframes, and sills should also be inspected, as low mileage does not preclude environmental damage. Finally, the tyre tread depth and lateral wear patterns must be verified, as the single MOT pass does not confirm consistent upkeep.