1992 Peugeot 106 1.4L Petrol · J818 RJC
1992 Peugeot 106 (1.4L, petrol). First registered 02 Apr 1992. Recorded mileage 72,736 miles. MOT expired on 03 Jul 2023.
- Make & Model
- PEUGEOT 106
- Year / Origin
- 1992
- Safety Recall
- Unknown
- MOT Status
- Expired on 03 Jul 2023
- Road Tax
- —
- Recorded Mileage
- 72,736 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
J818 RJC Key Findings
- 15 MOT tests recorded
- Latest MOT passed on 05/07/2022
- 72,736 miles recorded at latest MOT
- 3 historical MOT failures
- 3 defects noted at the latest MOT
- Recurring brakes items (19 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
J818 RJC MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
15 MOT tests are recorded for this 1992 Peugeot 106 (J818 RJC) between September 2005 and July 2022.
The record contains 12 passes and 3 failures.
The most recent test on 05 July 2022 was a pass, although the earlier record includes 3 failures that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Brakes (19 issues), Lighting (7 issues), Suspension (6 issues), Tyres (4 issues), Windscreen (4 issues). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 22 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))”; “Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)”; “Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))”.
J818 RJC Mileage History
- 16/09/200527,345 mi
- 19/09/200631,373 mi+4,028 mi
- 21/09/200735,520 mi+4,147 mi
- 08/09/200838,263 mi+2,743 mi
- 21/09/200941,360 mi+3,097 mi
- 18/10/201043,016 mi+1,656 mi
- 11/10/201146,479 mi+3,463 mi
- 08/10/201250,167 mi+3,688 mi
- 26/09/201352,249 mi+2,082 mi
- 02/01/201557,584 mi+5,335 mi
- 05/01/201557,584 mi
- 05/01/201666,668 mi+9,084 mi
- 09/01/201666,673 mi+5 mi
- 04/07/202272,736 mi+6,063 mi
- 05/07/202272,736 mi
Average of roughly 2,702 miles per year across 15 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Peugeot Peugeot 106
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Below Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: PEUGEOT 106
Known issues reported by owners and MOT testers.
- Rear Trailing Arm Axle Bearing Seizure(Serious)
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant Leaks(Serious)
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant Wear(Moderate)
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (J818 Series)
Vehicles registered in the same regional DVLA batch as J818RJC.
VOLKSWAGEN
LT
MAZDA
MX-5
YAMAHA
FJ
LOTUS
ELAN
PORSCHE
944
SUZUKI
FIAT
HYMER
HONDA
CRX
BMW
3 SERIES
BMW
R SERIES
SUZUKI
RGV250
PIAGGIO
T5
PEUGEOT 106 Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1992 model year cars.
- Rear Trailing Arm Axle Bearing SeizureSerious
The rear suspension on the 106 uses a transverse torsion beam tube with trailing radius arms riding on needle roller bearings. Over years of UK rain, road grit, and road salt, the outer rubber water seals perish. Water enters the axle tube, corroding the needle bearings and gouging the hardened steel pivot shafts. As the bearings collapse, the rear wheels tilt inwards at the top (excessive negative camber). In advanced stages, the inner tyre sidewall rubs directly against the inner wheel arch tub.
- TU Engine Cylinder Head Gasket Oil and Coolant LeaksSerious
The PSA TU eight-valve petrol engine family (1.1, 1.4, and 1.6) is notorious for head gasket degradation. Specifically, the pressurized oil feed gallery passes through the front-left corner of the cylinder head, directly above the alternator. The factory composite gasket deteriorates around this corner, causing engine oil to weep externally down the front face of the block. If neglected, the failure breaches the coolant passages, causing coolant loss, oil-coolant cross-contamination, and overheating.
- Stiff or Snapping Clutch Cable and Pedal Quadrant WearModerate
The manual 106 uses a mechanical clutch cable coupled to a plastic self-adjusting toothed ratchet quadrant mounted atop the clutch pedal box. Over time, road dirt and heat cause the inner steel cable to fray and bind inside its protective outer nylon sheath. The resulting excessive pedal resistance puts heavy mechanical stress on the plastic quadrant teeth, causing the ratchet to slip or the cable to snap completely, leaving the pedal stuck flat to the cabin floor.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.