2016 Volkswagen CC 2.0L Diesel · KV66 AEA

The Volkswagen CC’s most recent MOT test on 2025-11-20 confirmed roadworthiness with no defects, though it follows an unusual consecutive pass-fail at the same mileage (138,382) just one day earlier. This pattern suggests either a rare administrative anomaly or a brief, isolated oversight in pre-test preparation, as no recurring faults appear in the record. The vehicle’s history since 2022 shows consistent annual testing without advisories, indicating no persistent mechanical issues were overlooked by previous testers. However, the lack of defects does not preclude hidden wear—particularly in high-mileage components—so a thorough inspection remains critical. The recorded mileage of 138,382 miles over ten years equates to an average of 13,838 miles annually, which is elevated for a vehicle of this age. This rate implies regular use, accelerating wear on suspension bushes, coil springs, and brake calipers. Notably, the gap between tests is uniform—approximately 12,000 miles—yet the sudden spike from 107,454 to 121,640 miles between November 2023 and November 2024 (a 14,186-mile jump) suggests either a period of heavier usage or delayed servicing. The absence of advisories during these intervals does not guarantee all maintenance was addressed, particularly for non-MOT-required items like differential fluid or timing belt condition. Given the high mileage and consistent annual testing, a buyer should prioritise inspecting the suspension for worn or leaking bushes and degraded coil springs, as these are common failure points at this mileage. The brakes, though not flagged in MOTs, may exhibit uneven wear or binding calipers—especially if the vehicle has been driven aggressively. Corrosion should be checked at wheel arches, sills, and subframes, as rust can compromise structural integrity. Finally, verify the exhaust system for leaks or excessive corrosion, as emissions systems often fail silently. The lack of advisories does not rule out deferred maintenance, so a pre-purchase inspection by a qualified mechanic is strongly advised.