2019 FIAT 5001.2L Petrol

This Fiat 500 demonstrates a consistent roadworthiness record, with all four MOT tests—conducted between May 2022 and July 2025—resulting in clean passes at 8,231, 10,656, 11,829, and 13,194 miles respectively. The absence of defects across these intervals suggests the vehicle has not experienced recurring mechanical failures or advisory issues that would warrant further scrutiny. However, the most recent test in July 2025, just over a year ago, means the vehicle is now approaching its next MOT due date. While this does not inherently indicate neglect, it does necessitate a buyer to verify whether any maintenance or repairs have been performed since then, particularly for components subject to gradual wear such as suspension bushes, coil springs, and brake calipers. The recorded mileage of 13,194 miles over seven years—approximately 1,885 miles annually—is notably low for a vehicle of this age, suggesting either minimal usage or prolonged periods of inactivity. The gaps between tests are consistent, with roughly 1,500 to 2,000 miles accumulated between each MOT, which aligns with typical light-duty driving patterns. There is no evidence of rapid mileage accumulation that might imply aggressive use or deferred maintenance, though the low annual mileage could also mean some components have been underutilised, potentially masking early signs of wear. The lack of advisories or defects in prior tests further supports the idea that the vehicle has been stored or driven in a manner that has not accelerated mechanical degradation. Given the clean MOT history, the primary focus for an in-person inspection should centre on components that are not directly tested during the MOT but are critical to long-term reliability. The suspension system—particularly the condition of the rear bushes and coil springs—should be examined for excessive play, cracking, or corrosion, as these are common wear items that can develop faults gradually without immediate failure. Brake discs and calipers, while not flagged in past tests, should be checked for uneven wear, binding, or excessive corrosion, especially if the vehicle has been stored for extended periods. Additionally, the underbody should be inspected for signs of structural corrosion, particularly around the wheel arches, sills, and exhaust system, as rust can compromise the vehicle’s integrity over time. Finally, the tyre tread depth and lateral wear patterns should be verified, as the absence of defects in past tests does not guarantee they have been replaced or rotated according to manufacturer recommendations.