2012 Peugeot 5008 1.6L Diesel · MA62 AAU

The 2012 Peugeot 5008 shows a consistent roadworthiness record over the past four MOT cycles, with the most recent test on 5 December 2025 at 142,601 miles passing without any defects or advisories. This suggests the vehicle has undergone regular servicing and maintenance, as no recurring issues have been recorded to indicate worsening mechanical conditions. The absence of advisories in the latest test further implies that no critical components—such as suspension bushes, coil springs, or binding calipers—were deemed borderline or in need of imminent attention. However, the single failure in August 2022, though without recorded defects, raises a minor concern about administrative oversight rather than mechanical reliability. The mileage progression of approximately 10,186 miles per year aligns with typical usage for a vehicle of this age, with no abrupt spikes or prolonged periods of inactivity. The gap between the 2022 failure and subsequent pass (just three days apart) is unusual but does not necessarily reflect mechanical neglect. The consistent interval between tests—around 12 months—indicates the vehicle has been driven regularly rather than stored, which could mitigate some wear-and-tear concerns. There is no evidence of excessive mileage accumulation that would suggest aggressive driving or deferred maintenance. Given the clean MOT history, a buyer should prioritise an in-person inspection of high-wear components that are not directly tested during the MOT. Focus on the suspension system, particularly the rear trailing arms and bushes, as these are common failure points in this model and may not always trigger an advisory. Examine the brake discs and pads for uneven wear or corrosion, especially if the vehicle has been driven in wet or salted conditions. Structural integrity should also be assessed, particularly the sills, wheel arches, and underbody, for signs of corrosion that could compromise the chassis. While the MOT record shows no red flags, these areas are critical for long-term reliability and should not be overlooked.