2019 Ford KA 1.2L Petrol · SM19 XCG

The vehicle most recently passed its MOT examination on 4 August 2026. The overall maintenance trend is remarkably stable, as the vehicle has a consistent history of passes without defects or advisories dating back to 2023. The emergence of two advisories in the latest test represents standard consumable wear rather than a systemic mechanical failure, suggesting the car has been kept in a roadworthy condition throughout its life. With a recorded mileage of 44,068 miles over approximately seven years, the vehicle has averaged roughly 6,295 miles per year. This is a typical usage rate for a small city car and implies a balanced duty cycle. It avoids the risks associated with very high mileage, such as premature suspension fatigue, while also avoiding the pitfalls of extremely low usage, such as perished rubber seals or seized brake components resulting from prolonged inactivity. Immediate attention is required for the front tyres, as both the nearside and offside front tyres are noted as being worn close to the legal limit with evidence of edge wear. This indicates that a pair of new front tyres will be necessary shortly. The mention of edge wear is particularly important as it often points to incorrect wheel alignment or tracking issues. During a test drive, the buyer should monitor for any pulling to one side or unusual vibration through the steering wheel, and a professional four-wheel alignment is recommended upon replacement of the tyres. Given the otherwise clean MOT record, the buyer should focus on calendar-based maintenance and physical inspections. It is essential to verify the service history to ensure oil and filter changes have been performed at the correct intervals regardless of the moderate mileage. The buyer should inspect the brake discs for any significant corrosion and ensure there is no binding in the calipers. Additionally, the 12V battery health should be checked, and the sidewalls of the rear tyres should be inspected for any age-related perishing or hairline cracking to ensure they remain safe for continued use.