2016 Mercedes-Benz CLA 2.1L Diesel · XJ15 AAC

The vehicle currently holds a roadworthy status, having passed its most recent inspection in February 2026 at 80,058 miles with no recorded defects. The maintenance trend shows signs of improvement following a period of reactive repairs. While the vehicle failed in February 2025 due to a thin offside rear brake pad, the subsequent pass indicates that the immediate safety critical failure was addressed, bringing the car back to a clean operational standard. The mileage pattern is consistent with a ten-year-old vehicle, averaging approximately 8,000 miles per annum. This steady usage suggests regular operation rather than long periods of stagnation which can often lead to component degradation. Between March 2023 and March 2024, the car covered roughly 8,200 miles, followed by approximately 7,000 miles in the year leading up to the 2025 test. This linear mileage accumulation indicates a predictably driven vehicle, which typically results in consistent wear patterns on drivetrain and suspension components. A buyer should focus their physical inspection on the braking system, as the history reveals a recurring pattern of worn pads and discs. In 2023 at 59,001 miles, the front discs and pads were flagged, followed by pitted rear discs and thin pads at 67,235 miles. The failure in 2025 regarding the offside rear pad confirms that the braking components are reaching the end of their life cycles. It is essential to verify if the discs were replaced alongside the recent pads to ensure uniform braking performance. Specific attention should also be paid to the front suspension, referencing the March 2024 advisory which noted slight play in the nearside front lower suspension arm ball joint. While this did not cause a failure in subsequent tests, the buyer should check for lateral movement in the bushes and joints to ensure the condition has not worsened. There are no records of structural corrosion or exhaust issues in the data, suggesting the primary concerns remain limited to standard consumable wear and suspension-related maintenance.