2021 Ford Transit 290 Leader Ecoblue 2.0L Diesel · YM21 AGV

The Ford Transit demonstrates a currently roadworthy status, backed by a clean pass recorded on 2026-05-07 at 80,291 miles. The maintenance trajectory appears stable, reflecting standard commercial wear rather than chronic mechanical neglect. The most recent test highlighted a nearside rear tyre worn close to the legal limit on its outer edge, which points to a minor tracking or geometry alignment check required soon. Previous tests show typical consumable consumption, including an advisory for thin front brake pads and worn discs in May 2024 at 50,049 miles, alongside a minor oil leak and a defective indicator lens in May 2025 at 63,980 miles. These prior items were monitored advisories rather than outright failures, indicating previous owners addressed or accepted minor upkeep items without letting them escalate into dangerous defects. Accumulating 80,291 miles across five years yields an average of roughly 16,000 miles annually, confirming heavy commercial use typical of a working van. The mileage progression is consistent and uninterrupted across the three recorded annual tests, showing a steady accumulation of roughly 14,000 miles between May 2024 and May 2025, followed by another 16,300 miles leading up to the May 2026 test. This constant heavy mileage places accelerated stress on the drivetrain, steering components, and suspension bushes, meaning the vehicle has worked hard for its living rather than sitting idle. A prospective buyer should conduct a thorough physical inspection focusing on the high-wear chassis areas and drivetrain. Check the front brake discs and pads to confirm whether the thinning components flagged in 2024 were subsequently replaced, and inspect the engine bay around the lower block to trace the source of the minor oil leak noted in 2025. Verify the condition of the rear axle, leaf springs, and suspension dampeners, as heavy payload distribution frequently accelerates wear on these commercial underpinnings. Finally, inspect the tyre wear patterns across all corners to ensure alignment geometry is true and check the function of all exterior lighting lenses.