2022 Ford Transit Custom 280 Trend Eblue 2.0L Diesel · YM22 ABF

The most recent MOT test conducted on 27 June 2025 resulted in a pass with no recorded defects or advisories. This indicates that at the time of the inspection, the vehicle met all essential safety and environmental standards required by the DVSA. Based on the available data, the maintenance trend appears stable, as the vehicle was able to clear the inspection without any immediate mechanical or structural concerns being flagged by the tester. The recorded mileage of 79,622 miles for a four-year-old vehicle represents a high annual usage rate of approximately 19,906 miles. This level of accumulation is considerably higher than the typical average for this vehicle class and suggests a heavy duty cycle, likely involving consistent long-distance driving or intensive commercial use. While high mileage can often mean a vehicle has been used reliably on motorways, it also necessitates a more rigorous inspection of wear-prone components. The buyer should be aware that parts such as the suspension, braking system, and drivetrain components will have undergone significantly more stress and cycles than a lower-mileage counterpart. As the MOT record is currently clean, the inspection should focus on high-mileage wear that may not yet have reached a failure threshold. During a test drive, listen closely for any knocking or clunking from the suspension, which could indicate worn bushes, ball joints, or deteriorated coil springs. Pay particular attention to the braking performance; any shudder through the pedal or steering wheel during deceleration may suggest warped brake discs, while any pulling to one side could indicate binding calipers. It is also prudent to check the clutch engagement and gear transitions to ensure the drivetrain is not showing signs of premature fatigue. Beyond mechanical movement, a thorough review of the service history is critical to confirm that oil changes and major interval services have been carried out according to the manufacturer's requirements. Inspect the tyres for uneven tread wear, which can be a symptom of incorrect wheel alignment or worn suspension components. Check the underside of the vehicle for any signs of fluid leaks from the engine or gearbox, and examine the exhaust system for excessive corrosion. Given the high usage, ensure that the 12V battery and all electrical auxiliary systems are functioning correctly, as heavy-duty use can place significant demands on the electrical architecture.