2008 Ford Mondeo 2.0L Petrol · BD08 XFL

This 2008 Ford Mondeo has maintained a clean MOT history since its most recent test on 2025-08-21, with no defects recorded at 134,579 miles. The vehicle passed its last two tests consecutively, suggesting no recurring mechanical issues were detected by the tester. However, the single failure in July 2024—just 448 miles before its subsequent pass—indicates a brief anomaly rather than a persistent trend. The absence of advisories or repeated faults implies that, at least in terms of MOT compliance, the vehicle has been reliably roadworthy over the past two years. The mileage progression shows steady usage, averaging around 7,477 miles annually, which is typical for a vehicle of this age. There are no extended gaps between tests that might suggest neglect, nor is there evidence of rapid mileage accumulation that would raise concerns about accelerated wear. The interval between the 2023 and 2022 tests was slightly longer—around 13 months—likely due to the pandemic-related MOT backlogs, but this does not indicate irregular maintenance. The recorded mileage remains consistent with moderate, regular use rather than heavy or sporadic driving patterns. Given the lack of MOT-reported faults, a buyer should focus their inspection on high-wear components that are not routinely tested. The suspension—particularly the rear bushes and coil springs—should be examined for excessive play or corrosion, as these are common failure points in vehicles of this age. Brake discs and calipers, while not flagged in MOTs, may show uneven wear or binding, especially if the vehicle has been driven hard. Structural integrity is another critical area; inspect the sills, wheel arches, and subframe for corrosion, as rust can compromise the vehicle’s safety without always being detected in a standard MOT. Finally, the exhaust system should be checked for leaks or excessive rust, as emissions-related failures were not recorded but could still pose a risk. The clean MOT history suggests these areas have been maintained, but a thorough visual and functional inspection is essential to confirm their condition.