2017 Toyota Estima 2.4L Gas bi-fuel · BH17 LRN

The vehicle presents a concerning maintenance trend characterized by recurring mechanical issues and neglected consumables. While the October 2025 test at 87,570 miles resulted in a pass, the tester flagged worn tyres on both the front and rear inner edges, alongside slightly worn rear axle swivel pins and bushes. These advisories mirror issues identified in the October 2024 test, suggesting that while repairs are being made to meet minimum standards, the underlying wear in the suspension and tyre management is not being proactively addressed. The mileage accumulation appears consistent with typical usage for a nine-year-old vehicle, averaging approximately 9,730 miles per year. A significant jump in mileage occurred between the October 2024 test at 64,655 miles and the failed test recorded later that same month at 69,652 miles, which indicates a period of heavy or rapid use. The most recent interval between October 2024 and October 2025 shows an increase of roughly 23,000 miles, which is higher than the previous annual average and may have accelerated the wear seen on the tyres and suspension components. A prospective buyer must conduct a thorough physical inspection of the braking system and suspension. The October 2024 records show a failed test due to insufficient brake pad thickness and poor parking brake efficiency, followed by advisories for pitted and scored front brake discs. This history suggests the braking components are nearing the end of their service life. Furthermore, the persistent advisory regarding the rear axle swivel pins and bushes since October 2023 indicates a long-term wear pattern in the rear suspension that requires close scrutiny for any signs of excessive play or noise. The presence of an oil leak noted in October 2024 also warrants attention. Although the tester described it as not excessive, the recurrence of such issues alongside tyre wear suggests a reactive rather than preventative maintenance approach by previous owners. Inspect the engine bay for active leaks and check the condition of all suspension bushes and tyre tread depth to ensure they meet safety standards beyond the bare minimum required for a pass.