1986 Rolls Royce Silver Spirit 6.8L Petrol · C469 KER
1986 Rolls Royce Silver Spirit (6.8L, petrol). First registered 14 Jan 1986. Recorded mileage 65,633 miles. MOT expired on 20 Aug 2026.
- Make & Model
- ROLLS ROYCE SILVER SPIRIT
- Year / Origin
- 1986 · Cardiff
- Safety Recall
- Unknown
- MOT Status
- Expired on 20 Aug 2026
- Road Tax
- —
- Recorded Mileage
- 65,633 mi
- ULEZ Compliance
- Check Required (Pre-Euro 4 Petrol)
- Fuel & Engine
- Petrol · 6.8L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
C469 KER Key Findings
- 3 MOT tests recorded
- Latest MOT passed on 19/08/2025
- 65,633 miles recorded at latest MOT
- 1 defect noted at the latest MOT
- Recurring lighting items (4 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
C469 KER MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
3 MOT tests are recorded for this 1986 Rolls Royce Silver Spirit (C469 KER) between August 2023 and August 2025.
The record contains 3 passes and 0 failures.
The record shows no MOT failures, although 8 advisory notices note items to monitor.
Across all tests, the most frequently flagged areas are: Lighting (4 issues), Brakes (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 8 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
C469 KER Mileage History
- 15/08/202365,105 mi
- 22/08/202465,316 mi+211 mi
- 19/08/202565,633 mi+317 mi
Average of roughly 262 miles per year across 3 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Rolls-Royce Rolls-Royce Silver Spirit
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Average
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: ROLLS ROYCE SILVER SPIRIT
Known issues reported by owners and MOT testers.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System Failure(Serious)
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride Harshness(Moderate)
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-By(Moderate)
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Vehicle & Plate History
Previous plates for this vehicle
Similar Vehicles
Plate Neighbors
ROLLS ROYCE SILVER SPIRIT Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 1986 model year cars.
- High-Pressure Hydraulic Braking Accumulator and Mineral Oil System FailureSerious
The SZ generation employs a complex Citroën-licensed dual-circuit hydraulic system operating at over 2,000 psi to power the braking system and rear self-levelling suspension. The nitrogen-charged brake accumulator spheres lose pressure over 5 to 8 years, resulting in a rock-hard brake pedal, prolonged pump cycle times, and reduced reserve braking capacity. If brake fluid types are mistakenly interchanged (such as adding standard DOT fluid into mineral oil systems), internal rubber seals dissolve, triggering catastrophic system failure.
- Rear Hydraulic Suspension Gas Sphere Deterioration and Ride HarshnessModerate
The hydropneumatic rear self-levelling suspension relies on two nitrogen-filled gas spring spheres connected to rear hydraulic struts to provide spring compliance and damping. Over time, nitrogen gas permeates across the internal rubber diaphragm, reducing the gas volume until the sphere hydraulically locks solid. This eliminates rear suspension compliance, transmits harsh road shocks directly into the monocoque body, and causes rapid failure of rear subframe bushes and lower shock absorber mountings.
- Exhaust Manifold Cracking and Gasket Blow-ByModerate
The 6.75-litre L-Series V8 produces substantial thermal load within a heavily enclosed engine compartment. Over thousands of heat cycles, the cast-iron exhaust manifolds warp and stress their mounting studs, causing the composite manifold gaskets to blow out or the cast manifolds to develop hairline fatigue fractures. Remediation requires extracting seized or snapped studs from the aluminium cylinder heads in extremely tight engine bay clearances, demanding substantial specialist labour.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.