2019 Vauxhall Mokka 1.4L Petrol · DU19 VGG

The most recent MOT test conducted on 26 November 2025 resulted in a pass with no defects recorded. Looking back through the vehicle history since 2021, there is a remarkably consistent trend of clean passes without a single advisory or failure noted. This indicates a highly stable maintenance profile and suggests that the vehicle has been kept in a condition that exceeds the minimum legal roadworthiness standards, with potential faults likely addressed proactively before the annual inspection. With a recorded mileage of 53,548 miles over approximately seven years, the vehicle has averaged roughly 7,650 miles per annum. This usage rate is considered typical for a domestic vehicle of this age and suggests a balanced duty cycle. It avoids the excessive wear associated with high-mileage motorway use while remaining active enough to prevent the stagnation issues often found in very low-mileage examples, meaning the drivetrain and suspension components should still possess significant remaining service life. Given the absence of historical defects, the physical inspection should focus on age-related degradation that may not trigger an MOT failure but affects long-term reliability. You should closely examine the tyre sidewalls for signs of perishing or fine cracking, as rubber compounds degrade over time regardless of tread depth. It is also essential to inspect the brake discs for surface corrosion and ensure there are no binding calipers, which can occur if the vehicle has spent prolonged periods stationary. Finally, verify the service history to ensure that calendar-based maintenance has been adhered to, specifically regarding engine oil, coolant, and brake fluid replacements, as these fluids degrade chemically over time. Check the health of the 12V battery, as a seven-year-old unit may be approaching the end of its reliable lifespan. During the test drive, listen for any subtle knocks from the suspension bushes or coil springs, which can begin to fatigue around this mileage, and ensure the gear transitions are smooth and devoid of hesitation.