2014 Audi A4 2.0L Diesel · FL64 UPS

A consistent pattern of clean test sheets defines the roadworthiness trajectory of this Audi, culminating in a pass recorded on 15 August 2026 without a single defect noted. Across eight consecutive annual examinations dating back to 2019, the testing history reveals only one recorded advisory regarding edge wear on the offside front tyre during the 2025 test, indicating that the car has otherwise maintained a stable technical record during recent years. This absence of recurring structural or mechanical failures provides a baseline of compliance through successive MOT inspections. Accumulating 123,725 miles over its 12-year lifespan results in an average of approximately 10,310 miles driven annually, reflecting entirely typical usage for a diesel or petrol saloon of this class. The testing cadence remains uninterrupted, with annual examinations occurring at consistent twelve-month intervals without any extended gaps or periods of statutory off-road status. This steady accumulation pace distributes mechanical wear evenly across the drivetrain and chassis, avoiding the specific degradation risks associated with prolonged periods of inactivity or severe high-mileage commercial deployment. Although the official record is largely clear of chronic defects, the single tyre advisory from 2025 serves as a prompt to thoroughly inspect the current rubber and suspension geometry for any signs of uneven contact patches or tracking misalignment. During a static inspection, check the inner and outer tread depths across all four corners and inspect the front axle components for premature play in the wishbones, track rod ends, and anti-roll bar drop links, which commonly bear the brunt of higher-mileage road impacts on this platform. On the road test, pay close attention to the steering response and listen for any knocking noises from the front suspension over speed humps or rough tarmac, as these indicate worn bushes or ball joints. Test the braking system firmly from speed to check for any shudder through the pedal, and ensure the transmission shifts smoothly through all gears without hesitation or clutch slip if manual, verifying that the mechanical assembly operates as expected for its mileage.