2019 Peugeot 2008 Allure Prem Puretech S/S 1.2L Petrol · GK69 OVM

The vehicle's overall roadworthiness is currently passing, as evidenced by the most recent MOT test on 2025-10-14 at 31,596 miles, which was passed without defects. This indicates that the vehicle has maintained a functional drivetrain and suspension system up to the current date, with no active faults recorded. The maintenance trend appears stable, showing a consistent pattern of passing tests without recurring issues or deterioration of components. The mileage history reveals a clear acceleration pattern relative to the vehicle's age of approximately seven years. The rapid accumulation of 31,596 miles over the last two years suggests a significant increase in cumulative wear, which may be driven by usage patterns or vehicle age. While the mileage is relatively low compared to typical high-mileage vehicles, the progression from 28,385 to 23,598 miles indicates that the vehicle has not experienced a sudden, catastrophic drop-off in performance but rather a steady, gradual wear that has been well-managed. This accumulation rate is consistent with a vehicle that has undergone normal operating conditions rather than a severe accident or prolonged inactivity. Given the current status and the flagged faults from the earlier MOT entry on 2023-10-06, a buyer should conduct a thorough physical inspection to identify any remaining structural or mechanical risks. The history specifically flags nearside and offside tyre wear, which, while often minor, can compromise the vehicle's structural integrity if not addressed promptly. Furthermore, the absence of defects in the most recent test means that no major brake or suspension problems are currently present, but the history of tyre wear on the nearside and offside sides warrants a detailed check of the suspension bushings and springs. A buyer must verify that the braking system is still in good condition and that the exhaust emissions are compliant, as the previous test on 2023-10-06 noted an inoperative light source, a detail that requires specific verification at the site.