2003 Suzuki Carry 1.3L Petrol · KB03 EWM

The most recent MOT test on February 8, 2022, confirmed the vehicle as roadworthy at 171,439 miles, though it was retested just three days earlier on January 31, 2022, and failed without recorded defects—a rare but documented anomaly. The preceding tests in 2020 and 2019 also show identical patterns: failures on the first test date (July 31, 2020, and August 2, 2019) followed by immediate passes on subsequent retests, all with no specific faults logged. This suggests either administrative oversight in the initial MOT process or a vehicle that consistently meets minor threshold standards without critical issues. The absence of advisories or recurring faults implies no obvious mechanical trend, but the lack of defect details leaves key components unaccounted for. The vehicle’s mileage progression reveals a steady accumulation of approximately 7,454 miles annually, which aligns with typical usage for its age. Between the 2019 and 2020 tests, the vehicle covered roughly 9,883 miles in just under a year, a slightly higher rate than the long-term average, but not extreme. The gap between the 2020 and 2022 tests—over 18 months—is notable, as it exceeds the standard 12-month MOT interval. This suggests either prolonged off-road or storage use, which could accelerate wear on suspension bushes, coil springs, and drivetrain seals, or simply delayed testing without intervening maintenance. The lack of mileage gaps earlier in the record implies consistent use, but the extended interval warrants scrutiny of fluid levels and component degradation. Given the absence of specific defect records, the buyer should prioritise an inspection of high-wear areas prone to silent failure in a vehicle of this age and mileage. Focus on the suspension system—particularly the rear axle bushes and coil springs—for signs of excessive play or corrosion, as these components often degrade gradually without immediate MOT failure. The braking system, while not flagged, should be tested for binding calipers, uneven disc wear, or corrosion in the rear drums, given the vehicle’s age and the rear-wheel-drive configuration. Structural integrity is also critical; examine the sills, wheel arches, and sub-frame for corrosion, as rust can compromise load-bearing members without immediate MOT detection. Finally, verify the condition of the exhaust system for leaks or structural weakness, especially around the catalytic converter and muffler mounts, which are common failure points in this model.