2009 BMW M3 Semi Auto 4.0L Petrol · KXI 28

This BMW M3 SEMI AUTO has maintained a consistent MOT history with no defects recorded across the last four tests, most recently passing on 20 May 2026 at 54,847 miles. The absence of advisories or failures suggests the vehicle has undergone regular, if not meticulous, maintenance in line with manufacturer recommendations. However, the most recent test occurred just two months ago, which is acceptable but not ideal for a vehicle of this age and mileage—given its age and typical wear patterns, a more frequent inspection cycle would be prudent. The lack of recurring issues in the MOT record implies that major components such as suspension, brakes, and emissions systems have been either well-maintained or replaced proactively. The recorded mileage of 54,847 miles over nearly 17 years—approximately 3,226 miles annually—indicates unusually light usage for a vehicle of this age. The gaps between tests are consistent, with roughly 12-month intervals between MOTs, which aligns with the legal requirement but does not reflect aggressive driving or heavy wear. The most significant mileage jump occurred between the 2022 and 2024 tests, where the vehicle accumulated 1,207 miles in under a year, yet no issues arose. This suggests the owner may have prioritised maintenance during periods of higher usage, though the overall low mileage could also imply prolonged periods of inactivity, potentially leading to neglected fluid changes or minor corrosion risks. Given the clean MOT history, a buyer should prioritise an in-person inspection of high-wear components that are not fully covered by the MOT test. The suspension—particularly the coil springs, bushes, and dampers—should be examined for uneven wear or binding, as these are critical for handling and safety but not always flagged in a standard MOT. Brake systems, including calipers, pads, and discs, warrant close scrutiny, especially if the vehicle has experienced any sudden mileage spikes, as binding or uneven wear could indicate past neglect. Additionally, the underbody should be inspected for corrosion, particularly around the sills, subframe, and exhaust system, given the vehicle’s age and the potential for prolonged standing. Finally, fluid levels—engine oil, brake fluid, coolant, and differential fluid—should be checked, as these are not tested during an MOT but are essential for long-term reliability.