2011 Ford Fusion 1.4L Petrol · LF11 XRA
2011 Ford Fusion (1.4L, petrol). First registered 31 Mar 2011. Recorded mileage 29,546 miles. MOT valid until 11 Nov 2026.
- Make & Model
- FORD FUSION
- Year / Origin
- 2011 · Stanmore (North London)
- Safety Recall
- Unknown
- MOT Status
- Valid until 11 Nov 2026
- Road Tax
- —
- Recorded Mileage
- 29,546 mi
- ULEZ Compliance
- ULEZ Compliant (Euro 4+)
- Fuel & Engine
- Petrol · 1.4L
- Reliability Guide
- Common Faults
Thinking of buying this vehicle? Free MOT and tax checks do not cover legal ownership. If outstanding finance exists, finance companies have legal right to repossess without compensation.
LF11 XRA Key Findings
- 12 MOT tests recorded
- Latest MOT passed on 12/11/2025
- 29,546 miles recorded at latest MOT
- 1 historical MOT failure
- No defects recorded at the latest MOT
- Recurring tyres items (5 mentions)
Derived directly from the recorded DVSA and DVLA data shown on this page.
LF11 XRA MOT History
Interpretation generated from the recorded test data above — not an official DVSA statement and not a substitute for an independent inspection.
12 MOT tests are recorded for this 2011 Ford Fusion (LF11 XRA) between March 2014 and November 2025.
The record contains 11 passes and 1 failure.
The most recent test on 12 November 2025 was a pass, although the earlier record includes 1 failure that buyers may want to investigate.
Across all tests, the most frequently flagged areas are: Tyres (5 issues), Lighting (1 issue). Repeated mentions in one area can indicate an ongoing pattern worth checking in person.
In total 3 advisory notices are recorded. Advisories flag items that passed but may need attention before the next test; they are not evidence of how well the vehicle has been serviced.
Recorded failure items include: “Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))”; “Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))”; “Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii))”.
LF11 XRA Mileage History
- 26/03/20149,908 mi
- 23/03/201514,648 mi+4,740 mi
- 24/09/201515,771 mi+1,123 mi
- 16/08/201616,573 mi+802 mi
- 14/08/201717,084 mi+511 mi
- 18/11/202017,187 mi+103 mi
- 19/11/202017,202 mi+15 mi
- 24/02/202218,722 mi+1,520 mi
- 12/01/202318,805 mi+83 mi
- 11/01/202422,984 mi+4,179 mi
- 16/12/202426,142 mi+3,158 mi
- 12/11/202529,546 mi+3,404 mi
Average of roughly 1,688 miles per year across 12 recorded odometer readings.
Technical Specifications
Core Specifications
Identification & Status
Dimensions & Weights
Diagnostic & Valuation Intelligence
Estimate current market value
Generate an instant valuation benchmark based on live market listings, vehicle mileage, and recent dealer auction figures.
Known faults for Ford Ford Fusion (Europe)
Our database tracks 3 specific mechanical faults and recurring failure patterns identified across UK MOT testing stations for this generation.
MOT Roadworthiness: Good
This rating reflects historical MOT pass rates and recurring advisory wear patterns from official DVSA test logs. Note that roadworthiness does not verify outstanding finance, insurance write-offs, or stolen records.
Verify lender finance agreements, insurance write-offs, police stolen registers, and mileage rollback.
Common Problems: FORD FUSION
Known issues reported by owners and MOT testers.
- Pollen Filter Housing Bulkhead Water Ingress(Moderate)
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer Leak(Moderate)
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
Similar Vehicles
Similar Vehicles Checked Recently
Plate Neighbors
Batch Registration Neighbors (LF11 Series)
Vehicles registered in the same regional DVLA batch as LF11XRA.
TGB
BR8
HONDA
GL 1800 A-6
FIAT
DUCATO
MG
TF
BMW
R SERIES
FORD
MUSTANG
MG
TF
FORD
S-MAX
HARLEY-DAVIDSON
NIGHTSTER
VAUXHALL
VIVARO
MERCEDES-BENZ
VIANO
FORD
S-MAX
FORD FUSION Model Intelligence & Reliability
Verified MOT failure trends, buying advice, and technical directory specifications.
Owner-reported defects, recurring MOT failure points, and estimated repair costs.
Browse production generations, registration statistics, and trim variants.
Historical MOT pass rates and DVLA records for 2011 model year cars.
- Pollen Filter Housing Bulkhead Water IngressModerate
The cabin pollen filter on the Ford Fusion is located within the heater bulkhead beneath the windscreen scuttle panel. Over time, the factory foam weather-seal on the pollen filter housing cover deteriorates, dries out, and degrades from exposure to heat and moisture. Rainwater running off the windscreen bypasses the degraded seal and flows directly into the passenger footwell, soaking sound-deadening insulation and risking corrosion to the interior wiring harness and fusebox.
- 1.4 TDCi Common-Rail Fuel Injector Copper Washer LeakModerate
On 1.4-litre Duratorq TDCi diesel engines, the copper crush washers sealing the base of the fuel injectors against the cylinder head fire face can harden, erode, and fail. High-pressure combustion gases blow past the failed copper seal, venting hot diesel soot, hydrocarbons, and unburnt fuel into the injector wells. Over time, this baked soot solidifies into a hard, tar-like black carbon crust known as black death, damaging the injector body, creating exhaust fumes in the cabin, and making injector removal difficult.
Regional DVLA Registration Directory
Vehicles and registration batches issued by regional DVLA offices across the UK.
Recently Checked UK Vehicles
Live vehicle history checks and MOT records recently queried by UK car buyers.