2020 BMW 3 Series 2.0L Diesel · LG20 FOF

The vehicle currently holds a PASSED MOT from the September 2026 test at 35,076 miles, indicating that the mechanical system has been maintained since the most recent inspection. The maintenance trend appears stable, as the vehicle passed the test without any recorded defects in the current test or in the previous 2025 test at 30,410 miles. However, the overall roadworthiness is compromised by the history of a tire failure observed at 30,410 miles, which has been flagged as a defect. The 2025 test failure at this mileage suggests that basic upkeep was skipped, potentially leading to accelerated wear on the nearside front outer tyre, which is a critical structural component for the suspension system. The mileage accumulation over the past six years is notable given the vehicle's age of 6 years, with 5,846 miles recorded annually. While the total mileage is low relative to the vehicle's age, the specific data points reveal a significant gap in maintenance history. The absence of any defects in the 2023 and 2024 tests suggests that the owner may have been diligent about basic upkeep, such as tyre rotation and checking, but the 2025 failure at 30,410 miles indicates that this baseline was not maintained. The rapid mileage accumulation during this period, particularly the 30,410-mile test at 2025-03-05, highlights a lack of proactive monitoring for consumables like tyres and wiper blades, which are prone to failure under heavy use. To assess the vehicle's current condition and future risk, a buyer must inspect the suspension bushes and coil springs for binding or excessive play, as well as the brake discs and calipers for corrosion or binding. The 2025 test failure at 30,410 miles is a serious structural risk that requires immediate attention to prevent further deterioration of the suspension and braking system. Given the history of a tyre failure and the lack of any other defects, the vehicle is not roadworthy at this time and requires urgent mechanical work to ensure structural integrity and safety.