2009 BMW X5 3.0L Diesel · ML09 FFX

The vehicle presents a stable roadworthiness status following a clean MOT pass in March 2026 at 143,945 miles. This result follows a period of concern where the record reveals a consistent pattern of reactive maintenance rather than proactive component replacement. While the most recent test showed no defects, previous years indicate a history of recurring failures related to suspension components and lighting, suggesting that repairs are typically addressed only upon a test failure rather than on a preventative schedule. At 17 years old, the recorded 143,945 miles represent an average usage of approximately 8,500 miles per year, which is consistent with typical figures for an SUV of this age. The mileage accumulation appears steady, with for example, roughly 7,500 miles covered between February 2024 and February 2025. This consistent use suggests the vehicle has not sat stationary for long periods, though the age of the vehicle means that rubber and metal components are subject to significant wear patterns seen throughout the record. The mechanical history highlights persistent issues with the front suspension and braking. Between 2022 and 2025, the tester repeatedly flagged worn ball joints, anti-roll bar joints, and deteriorated dust covers on the front axle. The front brake discs were noted as pitted and scored in early 2024, and brake pads were frequently described as wearing thin. There is also a recurring trend of uneven tyre wear, specifically on the inner edges, which often indicates alignment issues or worn bushings in the suspension sub-assembly. A buyer should inspect the current state of the suspension arms and bushes for play, as these have been frequent points of failure in the past. The electronic parking brake was flagged as defective in 2020 and should be tested thoroughly to ensure the mechanism remains functional. Given the history of headlight misalignment and damaged reflectors, a quick visual check of the lighting system and structural integrity is necessary to ensure all previous defects have been permanently rectified.