2014 Audi Q5 2.0L Diesel · NA64 DWC

Recurring issues with the engine Malfunction Indicator Lamp (MIL) and intermittent tyre wear patterns define the mechanical history of this Audi Q5. The vehicle failed in both 2023 and 2024 due to an inoperative or malfunctioning engine warning light, though it successfully passed its most recent test on 27 July 2026 with no defects recorded. While the recent result shows no immediate failures, the history of MIL-related failures suggests a need to verify that the dashboard warning systems are fully functional and that no intermittent engine management faults remain latent. The vehicle has covered 129,564 miles over its twelve-year lifespan, representing an average annual accumulation of approximately 10,797 miles. This mileage profile is consistent with typical UK usage for a premium SUV of this age. This steady rate of use suggests the vehicle has not been subject to extreme high-speed motorway running or excessive short-trip urban cycles, but the total mileage indicates that wear on consumable components such as suspension bushings, brake discs, and drivetrain mounts should be closely monitored as they approach the end of their service life. Prospective buyers should pay close attention to the condition of the tyres and steering components during a test drive. The MOT records show a recurring trend of tyres being worn close to the legal limit or worn on the edges, most recently noted in June 2025. This pattern can indicate issues with wheel alignment or suspension geometry. During a road test, listen for any rhythmic thumping or humming from the tyres and check for any pulling to one side or steering wheel vibration, which could signal uneven tread wear or alignment faults. Specific attention should also be given to the engine management system and peripheral components. Given the previous failures regarding the MIL and advisories concerning coolant levels and wiper arm operation, it is advisable to check that the engine runs smoothly without hesitation and that the cooling system shows no signs of leaks or pressure loss. Verify that the dashboard displays all warning lights correctly upon ignition and inspect the wiper mechanism to ensure it operates without fouling the bonnet or causing obstruction, as previously flagged.