2021 BMW 118 1.5L Petrol · SE04 ARY

The vehicle’s most recent MOT test on 17 March 2026 confirms it remains roadworthy with no defects recorded at 37,391 miles. The consistent pass history over the past three years—without advisories or failures—indicates a stable maintenance pattern, though the lack of defects does not preclude hidden wear. The 2026 test was conducted just four months ago, which is well within the standard 12-month MOT cycle, though the vehicle’s age and mileage suggest a pre-MOT service or inspection may have preceded it. No recurring issues have been logged, but the absence of advisories on critical components like suspension bushes, coil springs, or binding calipers does not guarantee their current condition. The mileage progression reveals a steady accumulation of approximately 7,478 miles annually, which is typical for a vehicle of this age and model. The most notable gap is between the 2024 and 2025 tests, where the mileage jumped from 6,660 to 18,935—a 12,275-mile increase in under a year. This suggests either intensive use or a period of extended storage before reactivation. The final leg from 18,935 to 37,391 miles over the next 12 months follows a similar pattern, indicating no sudden spikes or prolonged inactivity. While this rate is reasonable, it implies higher wear on consumables like brake pads, tyres, and suspension components than a lower-mileage equivalent. Given the clean MOT record, a buyer should prioritise an independent inspection of suspension integrity, particularly the rear bushes and coil springs, as these are common wear points on BMW models with this mileage. The brakes, though not flagged, should be checked for uneven pad thickness or binding calipers, especially if the vehicle has experienced rapid mileage accumulation. Tyre depth and lateral wear patterns warrant scrutiny, as the lack of MOT advisories on tread could mask uneven wear from alignment issues or aggressive driving. Finally, a thorough examination of the underbody for corrosion—particularly around the sills, subframe, and exhaust mounts—is essential, as this age range often sees accelerated rust development in high-humidity regions.