2009 Ford Mondeo 2.0L Diesel · SL59 FNC

The vehicle presents a concerning roadworthiness profile characterized by a history of reactive maintenance rather than proactive care. While it passed its test in January 2022 at 209,154 miles, this record is now over four years out of date, leaving the current mechanical state entirely unknown. The trend shows a pattern where significant faults are only addressed after failing an inspection, as evidenced by the recurring failures of suspension and braking components that persisted across multiple years without comprehensive overhaul. At 209,154 miles, this 17-year-old Ford Mondeo has averaged approximately 12,300 miles per year. The data reveals a significant drop in usage between September 2019 and October 2020, where the vehicle covered only 494 miles in over thirteen months. This suggests the car may have sat for long periods, which often leads to perished rubber and seized components. The high-mileage nature places extreme demands on the drivetrain and suspension geometry, which are clearly showing signs of advanced wear in the records. A prospective buyer must conduct a thorough inspection of the rear suspension, as the record flags chronic issues with worn trailing arm bushes and failing anti-roll bar linkage ball joints. The tester noted corroded coil springs in both 2020 and 2021, indicating persistent environmental corrosion that could lead to structural failure. The previous failure for a serious fluid leak on the offside front shock absorber in 2021 further suggests the damping system is nearing the end of its functional life. The braking system requires immediate attention as the rear brake pads were flagged as thin in every single entry from 2019 to 2022. The repeated failures for exhaust emissions exceeding manufacturer-specified limits also indicate potential engine management issues or fuel system problems that have not been fully resolved. Given the lack of a recent MOT and the documented history of neglected mechanical wear, the risk of an immediate MOT failure or an expensive mechanical breakdown is high without a professional pre-purchase inspection.