2026 Leapmotor T03 Electricity · ST26 AOF

As the vehicle is a 2026 model and the current date is September 2026, there is no available MOT history to review. In the United Kingdom, a new vehicle does not require its first MOT test until it reaches three years of age. Therefore, it is impossible to establish a maintenance trend or assess whether the vehicle's mechanical condition is stable, improving, or declining based on official DVSA records. The absence of a test history is standard for a vehicle of this age, but it means the buyer must rely entirely on a physical inspection and the manufacturer's service documentation to gauge roadworthiness. The recorded mileage is currently unknown, which prevents an assessment of the annual usage rate or any potential for rapid mileage accumulation. Without this data, the mechanical implications regarding the wear of the drivetrain, suspension components, and braking system cannot be quantified. It is essential for a prospective buyer to confirm the odometer reading and cross-reference it with the service book and any previous registration documents to ensure the vehicle has been used within expected parameters and to rule out any possibility of mileage discrepancy. Since there are no recorded defects or advisories to guide the inspection, the buyer should perform a thorough physical assessment focused on age-related degradation and stationary storage issues. Even with low mileage, check the tyres for signs of perishing or sidewall cracking, which can occur if the vehicle has been stationary for long periods. Inspect the brake discs for heavy surface corrosion and ensure the calipers are not binding, as infrequent use can lead to seized components. For an electric vehicle, it is also critical to verify the health of the 12V auxiliary battery and ensure the high-voltage battery has been managed according to manufacturer specifications to prevent capacity loss. During the test drive, pay close attention to the vehicle's handling and listen for any abnormal noises from the suspension bushes or coil springs. Check for any uneven tyre wear that might suggest an alignment issue and ensure the braking system provides smooth, consistent deceleration without any shudder or pulling to one side. Finally, confirm that the service history is complete and that all scheduled maintenance has been performed to preserve the manufacturer's warranty and ensure long-term structural and mechanical integrity.